Dynamic movement. A striking presence.
The A3 series combines a lightweight structure with dynamic movement in a full-size humanoid. The Developer version provides a foundation for custom content and robotics application development.
A series
AGIBOT A3 Developer-Robot (Europe)
1 / 7
The software and equipment required for these applications are specified in the quotation.
A lightweight, full-size humanoid for dynamic movement, customised characters and synchronised performances.
Contact us for pricing.
Availability and configuration are agreed individually.
173 cmheight
55 kgweight
1152 Whdual batteries
≤ 10 hoursmanufacturer-stated maximum operating time
A closer look at AGIBOT A3 Developer.
From individual movements to a coordinated performance.
LinkCraft supports motion design, while LinkSoul supports character creation. The manufacturer also demonstrates UWB positioning and coordination of larger robot groups; site and software requirements must be clarified for each project.
Dual batteries for flexible scheduling.
Using two batteries can reduce charging interruptions. Actual operating time depends on the task: intensive movement, manipulation and computationally demanding applications consume more energy.
The hardware, explained.
Front view
Display and interaction camera
A head display and binocular interaction camera support visual interaction.
Left and right speakers
Speakers on both sides of the head provide audio output.
Microphone and switch
A microphone in the upper body and a power switch below the neck.
Upper arm and forearm
Articulated arms enable coordinated movement and expressive gestures.
Standard silicone hand
Silicone hands are part of the standard configuration.
Thigh and calf
Leg joints control stepping movements and posture.
Foot
The robot’s ground-contact support surface.
Rear view
Shoulder touch sensors
Sensors on both shoulders detect touch.
Dual battery compartments
Two separate battery bays are accessible from the rear.
Maintenance port
A rear service opening provides maintenance and debugging access.
Charging port
The charging connection is located on the side of the torso.
Waist and handle
The waist supports body movement; a rear handle assists with handling.
Equipment overview
Movement and mechanics
- Active degrees of freedom
- 31
- Neck degrees of freedom
- 2
- Waist degrees of freedom
- 3
Sensing and control
- Development
- Developer version: SDK access
- Shoulder touch sensing
- Supported
- Navigation positioning
- ±10 cm, ±10°
Power and operation
- Battery
- dual batteries, total 1152 Wh
- Operating time
- up to 10 hours, depending on use
- Charging time
- approx. 2 hours
See it in action.
COMPLETE DATA SHEET
Technical specifications.
Manufacturer specifications and measurement conditions, organised by topic.
Source: AGIBOT ↗
Design and equipment
- Height
- 173 cm
- Weight
- 55 kg
- Active degrees of freedom
- 31
- Frame material
- Magnesium alloy, titanium alloy and TPU components
- Persona and appearance
- LinkSoul persona settings; appearance customisation according to project requirements
- Delivery and installation
- Manufacturer-described function: autonomous entry into and exit from the transport case
View full technical specificationsShow less
- Appearance customisation
- Clothing, wraps and covers, subject to project scope
- Commissioning
- Single-person deployment workflow in the manufacturer’s presentation; operator training required
- Reliability tests
- 92 automotive-style tests stated by the manufacturer; not a separate NT SYS certification
- Design life
- 3 years according to the manufacturer; not a warranty period or guaranteed lifetime
A3 platform data. Final SDK access, licences, radio modules, motion library and delivery contents for the EU Developer version are agreed in the quotation. Maximum operating time does not guarantee continuous dynamic movement.
Motion and performance
- Walking speed
- max. 1.8 m/s
- Running speed
- max. 5 m/s, under suitable conditions
- Peak power
- 12 kW according to the manufacturer’s presentation
- Power-to-weight ratio
- 0.218 kW/kg
- Motion planning
- LinkCraft compatibility
Power and operating time
- Battery
- dual batteries, total 1152 Wh
- Operating time
- up to 10 hours, depending on use
- Charging time
- approx. 2 hours
- Maximum current
- 150 A according to the manufacturer’s presentation
- Battery replacement
- Dual batteries with hot-swap support
- Battery cell design
- Full-tab cell design, dual batteries
- Quick battery replacement
- approx. 10 seconds; hot swap
Control, software and connectors
- Development
- Developer version: SDK access
- Network
- Dual-module 5G with dual-SIM support
- Group control
- Coordination of more than 100 robots through the manufacturer’s system
Sensing and interaction
- Positioning
- UWB; manufacturer accuracy < ±10 cm
- UWB positioning
- Standard equipment; manufacturer accuracy: < ±10 cm
- Shoulder touch sensing
- Supported
- Voice interaction
- Supported; language and application to be confirmed
Developer manual — dimensions and environment
- Overall dimensions (H × W × D)
- 173 × 52 × 30 cm
- Neck degrees of freedom
- 2
- Degrees of freedom per arm
- 7
- Degrees of freedom per leg
- 6
- Waist degrees of freedom
- 3
- Hand configuration
- The manual lists several optional 2026 hands: Agile 4 DoF/hand, Professional 13 DoF/hand; 6 DoF/hand is also listed. Confirm the exact EU configuration
- Charger input
- 110–220 V; EU mains version to be confirmed
- Operating temperature
- −10…45 °C
- Operating humidity
- 10–90%, non-condensing
- Storage temperature
- −20…70 °C
- Storage humidity
- 10–90%, non-condensing
- Joint module ingress protection
- IP5X; not the IP rating of the complete robot
- Minimum passage width, sideways
- 600 mm
- Minimum passage width, forwards
- 900 mm
- Maximum obstacle clearance
- 25 cm
- Slope capability
- Omnidirectional movement and stopping on a 15° slope, subject to the conditions specified in the manual
Developer manual — motion and sensing
- Head cameras
- Interactive stereo camera
- Navigation positioning
- ±10 cm, ±10°
- Navigation and obstacle avoidance
- Real-time support in the developer documentation; EU software package and deployment to be confirmed
- Maximum speed in the manual
- 1.2 m/s
- Basic movement directions
- Forward movement, left and right turns
- Communication
- Wi-Fi, Bluetooth, 4G/5G
- Rated arm payload
- 5 kg/arm in the v3.2 developer manual
- Loaded end-effector speed
- 1 m/s
- Unloaded end-effector speed
- 3 m/s
Arm joint ranges — v3.2 manual
- Shoulder pitch
- ±170°
- Shoulder roll
- ±91°
- Shoulder yaw
- ±160°
- Elbow flexion
- −60°…140°
- Wrist roll
- ±33°
- Wrist pitch
- ±93°
- Wrist yaw
- ±160°
Leg, head and waist joint ranges — v3.2 manual
- Hip roll
- −60°…100°
- Hip yaw
- ±158°
- Hip pitch
- −168°…154°
- Knee flexion
- −10°…140°
- Ankle pitch
- −52°…30°
- Ankle roll
- ±20°
- Head pitch
- −15°…30°
- Head yaw
- ±90°
- Waist roll
- ±20°
- Waist yaw
- ±150°
- Waist pitch
- ±30°
Control hardware — v3.2 manual
- MDU platform
- RK3588
- MDU processor
- 8-core ARM: 4 × A76 + 4 × A55, up to 2.3 GHz, L3 cache
- MDU memory
- 16 GB
- MDU storage
- 256 GB
- HDU platform
- RK3588S2
- HDU processor
- 8-core ARM: 4 × A76 + 4 × A55, up to 2.3 GHz
- HDU memory
- 16 GB
- HDU storage
- 128 GB
- Stereo camera resolution
- 1920 × 1536 px
- Stereo camera frame rate
- 30 fps
- Stereo camera data formats
- YUV422, MJPEG
- External network
- Wi-Fi through the HDU; 5G backup
- Ethernet port in the debugging compartment
- Disabled and unavailable according to the v3.2 documentation
- USB Type-A purpose
- For debugging and testing only
- USB Type-C purpose
- For charging the remote controller only; do not connect other devices
Actual performance depends on the environment, load, software and configuration. Maximum values may reflect different test conditions and may not be achievable simultaneously.
Package contents and options.
Package contents
- EU Developer robot configuration
- Battery and charger configuration in the itemised list
- Developer access and documentation within the agreed scope
To be agreed in the quotation
- SDK, ROS 2 and target application interfaces.
- Robotic hands, sensors and computing expansions.
- Navigation, autonomous charging and application licences.
- Delivery, commissioning, training and a pilot project.
The confirmed quotation itemises the equipment and licences included in the delivery. Illustrations may show optional accessories.
Applications.
A3 combines live performance, audience interaction and research applications. Custom workflows may require development, environment setup and validation.
Events and brand experiences
Create solo or coordinated robot performances with choreography and appearance tailored to the event.
Live-stream interaction
Bring gestures and planned audience interaction into a programme with a presenter and production team.
Themed visitor attractions
Engage visitors through planned demonstrations and interactive programmes in themed venues.
Reception and showroom tours
Welcome visitors and deliver prepared information in reception areas and company showrooms.
Research and education
Study robot motion and develop applications with the SDK-enabled Developer version.
Frequently asked questions.
What distinguishes the Developer version?
It shares the standard A3 hardware and adds SDK access for custom development.
What are its main physical specifications?
A3 is 173 cm tall, weighs 55 kg and has 31 active degrees of freedom.
How long does it run, and how long does charging take?
The 1152 Wh dual-battery system supports up to 10 hours of typical use. Full charging takes about two hours, and batteries can be swapped without shutting down.
Where can A3 be used?
Applications include stage performances, livestream interaction, exhibition tours and research.
Product data and manufacturer images: AGIBOT. For custom solution packages, the reference describes the base platform.
NT SYS · AGIBOT ROBOTICS
Let’s discuss your application.
We help select the right model, equipment and services.